Overview
HJQ-2 pneumatic Stirrer is a power device that uses a good pneumatic motor to use compressed air as the driving force of the working medium, uses the expansion of compressed gas to convert pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment. Especially suitable for stirring paints, chemicals, solvents, etc. with flammable and explosive substances or high temperature environments.
Features
1. Small Size, High Power, Safe and Light Operation;
2. With high rotational torque, it can be started with load;
3. Standard pressure gauge, you can check the pressure value at any time;
4. Imported self-locking chuck with self-locking function, high concentricity and long service life;
5. Cube lifting fixed clip adopts double hole mode, the height can be adjusted arbitrarily, the clamping is stable, and the operation is more stable;
6. The whole machine adopts explosion-proof no spark, no static electricity good pneumatic motor, safe operation, not easily affected by external environmental factors;
7. Impellers of various specifications are available.
Principle
HJQ-2 pneumatic Stirrer uses a good pneumatic motor to use compressed air as the driving force of the working medium, uses the expansion of compressed gas, and converts pressure energy into mechanical energy, so as to realize the stirring and mixing of samples in the experimental environment.
Applications
Flammable and explosive material environment, high temperature environment, paints stirring, chemical stirring, solvent stirring
Steps
1. Connect the compressed air source.
2. Select the appropriate Impeller and install it as required.
3. Adjust the Cube lifting fixing clip to the required height;
4. Start the air motor for stirring operation;
5. Monitor the pressure value through the standard pressure gauge.
6. Turn off the air source after stirring.
Notice
Make sure the compressed air pressure is within the range of 0 to 6 bar.
- Operating Ambient Temperature should be maintained at 5~ 40 ℃;
- The relative humidity shall not exceed 80%;
- Only applicable to batch processing methods;
- Check whether the Impeller is firmly fixed before use;
- Avoid improper use outside flammable and explosive environments;
Regular maintenance of air motors and chuck components.
