Overview
The YIHENG BPN-170RWP Co2 incubator is a precision device specially designed for cell fostering. It uses Water-jacketed Heating mode and infrared CO2 Sensor to provide a stable temperature, Humidity and CO2 concentration environment. The product is equipped with Touchscreen controller and multiple Safety protection systems to ensure the safety and reliability of the experimental process.
Features
1. Touchscreen controller: Large Touchscreen, Chinese and English optional interface, support Linear dispersion display, screen lock, 72-hour running record query and RS-485 Communication interface optional
2. CO2 concentration Control system: Imported infrared Sensor, high accuracy, fast recovery, 30 seconds after opening the door ≤ 3 minutes to restore to 5% set concentration
3. Temperature control monitoring system: Pt100 temperature detector precise temperature control, door temperature heating anti-condensation, Ambient Temperature monitoring anti-overshoot, over temperature protection and power failure alarm system
4, sterilization system: 90 ℃ high temperature heating and humidity sterilizing and ultraviolet sterilization system, effectively eliminate microbial pollution
5. Automatic control of circulating fan speed: automatically adjust the wind speed according to the temperature to avoid sample volatilization
6. Effective Filter: Microbial Effective Filter and HEPA Effective Filter to Ensure Gas Cleanliness
7. Safety functions: multiple alarm systems, optional hierarchical authority management, data recording and fault diagnosis display, wireless alarm system
Principle
Co2 incubator monitors and regulates CO2 concentration through infrared Sensor, Pt100 temperature detector controls the temperature in the box, and Water-jacketed Heating mode keeps the temperature stable. The circulating fan automatically adjusts the wind speed to ensure a uniform environment. The sterilization system eliminates microorganisms through high temperature heating and humidity or ultraviolet rays, effectively Filter and purify the gas, and maintain a sterile foster environment.
Applications
Cell fostering, microbial experiments, biopharmaceuticals, scientific research and education
Steps
1. Turn on the power supply and turn on the device
2. Set temperature, Humidity and CO2 concentration parameters through Touchscreen
3. Press the sterilization start button for high temperature heating and humidity sterilization (optional)
4. Place the sample and close the box door
5. Linear dispersion and alarm information
6. After the experiment, remove the sample and clean the equipment
Notice
• Avoid opening and closing doors frequently to maintain CO2 concentration and temperature stability
• Regularly check Filter and Sterilization System to ensure effectiveness
• Power supply voltage AC 220V 50Hz before use
• Pay attention to alarm prompts such as overtemperature and power failure, and deal with abnormalities in time
• Do not touch non-essential areas of the screen during operation to prevent misoperation
• The sterilizing process takes 18 hours to ensure full sterilization
