Overview
YIHENG MGC-350BP light Chamber is an efficient and energy-saving equipment, using imported brand Compressors and circulating fans, with low energy consumption, long service life, lower noise, and more than 40% cooling time saving compared with traditional low temperature equipment. Widely used in microbial tissue cell fostering, seed germination, seedling testing, plant cultivation, and insect and small animal feeding, it can accurately simulate different environment climate conditions.
Features
1. Microcomputer program control temperature, Humidity, Illumrination degree, can simulate the temperature and Humidity changes of day and night, or can choose Illuminant with sufficient and stable growth environment.
2. Large-screen LCD display, multiple sets of data one-screen display, Menu Operating interface, easy to understand, easy to observe and operate.
3. Imported brand Compressor to ensure long-term continuous operation of the test equipment, environmentally friendly refrigerant, effective, low energy consumption, and promote energy conservation.
4. Mirror stainless steel liner, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. 30 sets of programs can be set, each set time range is 1-99 hours (optional).
6. Equipped with an independent temperature limit alarm system, it will automatically interrupt when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (standard)
7. Can be equipped with RS485 interface and computer connection, synchronously monitor the experimental process or record experimental data through the computer. (optional)
8. Can be added: with CO2 air inlet (to promote plant growth) and CO2 controller. (Infrared CO2 Sensor)
Principle
The light Chamber controls temperature, Humidity and illumination by microcomputer program, simulates day and night environment changes, and uses imported Compressors and circulating fans to achieve high-efficiency cooling and air circulation to ensure stable climate conditions in the box. Optional CO2 Control system can adjust CO2 concentration through infrared Sensor to promote plant growth.
Applications
Microbial tissue cell fostering, seed germination, nursery experiments, plant cultivation, insect and small animal feeding
Steps
Connect the power supply and ensure that the voltage is AC 220V 50Hz.
2. Turn on the power of the device and set the temperature, Humidity and illuminance parameters through the large-screen LCD menu.
3. Optional set of 30 programs, each with a time range of 1-99 hours.
4. Place the sample on the shelf and load and unload the Shelf holder as needed.
5. Start the equipment, monitor the operating status, and ensure the normal operation of the independent temperature limit alarm system.
6. Optional to connect to a computer through the RS485 interface to monitor and record experimental data in real time.
7. After the experiment, turn off the power and clean the liner.
Notice
• Ambient Temperature should be kept within the range of + 5~ 30 ℃.
• Continuous Operating Time of not less than 180 hours to avoid overload operation.
• Regularly clean the mirror stainless steel liner to prevent contamination.
• When using optional features, ensure that the CO2 controller and interface are properly installed.
• Power supply voltage matching to prevent equipment damage.
