Overview
YIHENG MGC-800B light Chamber is an efficient and energy-saving equipment, using imported brand Compressors and circulating fans, with high efficiency, low energy consumption, long service life, low noise, and more than 40% cooling time saving compared with traditional low temperature equipment. Widely used in microbial tissue cell fostering, seed germination, seedling test, plant cultivation, and insect and small animal feeding, it can accurately simulate different environment climate conditions.
Features
1. Microcomputer program control temperature, Humidity, Illumrination degree, can simulate the temperature and Humidity changes of day and night, or can choose Illuminant with sufficient and stable growth environment.
2. Large-screen LCD display, multiple sets of data one-screen display, Menu Operating interface, easy to understand, easy to observe and operate.
3. Imported brand Compressor to ensure long-term continuous operation of the test equipment, environmentally friendly refrigerant, effective, low energy consumption, and promote energy conservation.
4. Mirror stainless steel liner, four corners and half arc transition, Shelf bracket can be freely loaded and unloaded, easy to clean the box.
5. 30 sets of programs can be set, each set time range is 1-99 hours (optional).
6. Equipped with an independent temperature limit alarm system, it will automatically interrupt when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents. (standard)
7. Can be equipped with RS485 interface and computer connection, synchronously monitor the experimental process or record experimental data through the computer. (optional)
8. Can be added: with CO2 air inlet (to promote plant growth) and CO2 controller. (Infrared CO2 Sensor)
Principle
The light Chamber controls temperature, Humidity and illumination by microcomputer program, simulates day and night environment changes, and uses imported Compressors and circulating fans to achieve high-efficiency cooling and air circulation to ensure stable climate conditions in the box. Optional CO2 Control system can precisely adjust CO2 concentration through infrared Sensor to promote plant growth.
Applications
Microbial tissue cell fostering, seed germination, seedling experiment, plant cultivation, insect, small animal feeding
Steps
1. Connect the power supply and ensure that the voltage is AC380V 50Hz.
2. Turn on the power of the device and set it through the large-screen LCD display interface.
3. Use a microcomputer program to set parameters such as temperature, Humidity, Illumrination degree, etc., which can simulate day and night changes.
4. Set program groups (up to 30 groups) as needed, with a time range of 1-99 hours per group (optional).
5. Place the sample on the shelf and start the equipment to run.
6. Monitor the experimental process, and connect to the computer to record data through the RS485 interface (optional).
7. After the experiment, turn off the power and clean the liner.
Notice
• Equipment Ambient Temperature should be kept at + 5~ 30 ℃.
• Continuous Operating Time of not less than 180 hours to avoid overload operation.
• Check whether the independent temperature limit alarm system is normal before use to ensure safety.
• When cleaning the liner, the Shelf bracket can be freely loaded and unloaded, and care should be taken to avoid scratching the mirror stainless steel.
Optional features such as programming, RS485 interface, and CO2 controller require additional configuration.
• Power supply voltage must match AC380V 50Hz to prevent equipment damage.
