Overview
The SUJIE ZNC-1800 Clean Bench is a vertical air flow type cleaning equipment. The outer box is sprayed with Cold rolled steel plate and the work surface is an integrated stainless steel design. The table offers ISO 5 (Class 100) cleanliness rating with an average wind speed of 0.2~ 0.5m/s, suitable for operations requiring a high cleanliness environment.
Features
1. Cold rolled steel plate spray process is used to effectively inhibit the growth of bacteria
2. Aluminum Frame No Shelf High Efficiency Filter, filtrating efficiency 99.995% (≥ 0.3μm particles)
3. Intelligent LCD large screen display, electronic stepless voltage regulation and speed regulation, can display parameters such as working area temperature, descending airflow, Filter life and so on
4. Centrifugal fan with low noise, low power consumption, voltage fluctuation compensation and resistance induction compensation
5. Equipped with Filter failure, damage, blocking alarm and fan overload alarm
6. Integrated stainless steel workbench, corrosion resistance, easy to clean
7. Real-time temperature sensor and wind speed Sensor monitoring
8. Front 10 ° tilted operating surface, ergonomic
9. Quasi-closed countertop, effectively preventing external gas induction
10. Thickness of front window glass ≥ 6mm
11. UV Lamp and Lighting Interlock Protection Design
12. Suspended lifting system Glass door, flexible operation
13. Double-sided perspective window design, good lighting effect
14. Efficient Filter Surrounding Ring Negative Pressure Design, Operating Area Positive Pressure Surrounding
15. Reasonable structural design, easy maintenance and replacement
Principle
The Clean Bench adopts vertical airflow mode, and the air is purified by a centrifugal fan through a high-efficiency filter to form a clean vertical downdraft. The high-efficiency filter is surrounded by a ring negative pressure design and the operation area is surrounded by a positive pressure design, which together form a sterile and high-clean working environment. The wind speed Sensor monitors the downdraft Flow velocity in real time to ensure the safety of the work area.
Applications
Biopharmaceuticals, medical inspection, laboratory research, electronics industry, food testing, microbiology
Standards
ISO 5 (Class 100)
Steps
1. Connect AC single-phase 220V/50HZ power supply
2. Set various parameters through the smart LCD large screen
3. Use touch buttons to adjust parameters such as wind speed and temperature
4. Operate the Suspended Lift Glass Door to the appropriate position
5. Perform relevant operations in the work area
6. Turn off the power of the device after the operation
Notice
* Pay attention to the interlock protection between the UV Lamp and the lighting lamp to avoid misoperation of the UV Lamp
* Regularly check the Filter status and replace the failed Filter in time
Keep the work surface clean and disinfect it regularly
Pay attention to the operating status of the fan to avoid overload
Pay attention to the complete closure of the front window glass when operating
* Device weight 140Kg, need to pay attention to safety when handling
