Overview
YOKE P16 Touchscreen Benchtop 3-in-1 is a Multi-Parameter measurement instrument for High Accuracy measurement in the laboratory, covering a variety of electrochemistry parameters such as pH, conductivity and dissolved oxygen. It is suitable for industries such as petroleum, chemical, power plant and environmental protection, and has wider applications in education and research.
Features
1. Adopt 7-inch color high-resolution capacitive Touchscreen, UI design, navigation operation experience, Sensitivity is high, parameter display is complete and intuitive. The host shell is made of PEEK material, which is resistant to high temperature, corrosion and Aging Resistance.
2. Built-in ARM32-bit microprocessor chip, using digital filtering and slip technology to intelligently improve Response speed and measurement accuracy. The circuit board adopts SMT patch process to improve Reliability.
3. The main interface can display the pH value /mV value/conductivity/dissolved oxygen concentration/dissolved oxygen Saturation/temperature value at the same time. Click on each item module to view the detailed value and calibrate.
4. Meet the international standard GLP requirements, with Automatic calibration, automatic temperature compensation, data storage, USB output, clock display, wireless printing, function settings and self-diagnostic information and other intelligent functions.
5. Built-in Chinese and English bilingual Operating system, the luminance of the instrument is adjustable, and the temperature unit can be freely switched between ° C and ° F. With temperature Electrode, temperature compensation can be automatically performed.
6. Built-in mass storage can store 2000 sets of measurement data, data can be transferred through U disk, storage data can be opened and edited by EXCEL.
7. Optional Bluetooth module, support wireless Bluetooth printing.
8. Based on the YOKE Instrument intelligent Internet of Things platform system of WeChat Mini Program, the mobile phone can view the instrument data in real time.
9. Polarographic Dissolved Oxygen Electrode with new structure can Measuring temperature and dissolved oxygen at the same time. Electrode polarization only takes 3 to 5 minutes. It is convenient to replace the sensitive film with a combined diaphragm cap.
10. Measurement mode of dissolved oxygen has the functions of automatic temperature compensation, automatic salinity compensation and automatic air pressure compensation.
11. Scalability: Conductivity detector Electrodes with different pH and different Electrode constants can be quickly replaced to adapt to different sample measurements.
12. Automatically identify 8 conductivity standard solutions (European and American series and Chinese series) and 15 pH standard buffer solutions (European and American series, NIST series and Chinese series).
13. Electrode status can be intelligently judged to ensure accurate use.
14. Switchable conductivity, TDS, salinity and resistivity. TDS and salinity are calculated using polynomials to ensure full scale conversion accuracy.
15. Comply with IP54 dust and splash-proof design.
Principle
The instrument has built-in pH module, Conductivity detector module and dissolved oxygen module. The ion activity, conductive ability and oxygen molecule concentration in the aqueous solution are detected by the corresponding Electrode Sensor, and the signal is transmitted to the built-in ARM32-bit microprocessor. The processor uses digital filtering and slip technology to process the signal, combined with automatic temperature, salinity, air pressure compensation and other functions, and finally calculates the exact pH value, mV value, conductivity, TDS, salinity, resistivity, dissolved oxygen concentration, dissolved oxygen Saturation and temperature parameters, and displays them on the Touchscreen.
Applications
Petroleum, chemical industry, power plant, environmental protection, education, scientific research
Standards
ISO9001:2000、CE、CMC
Steps
1. Turn on and select the test item (pH, conductivity or dissolved oxygen).
2. According to the measurement item, install or replace the corresponding Electrode.
3. If you need to calibrate, enter the corresponding project calibrate interface and use the standard solution automatically identified by the instrument for Automatic calibration.
4. Electrode is immersed in the solution to be tested, and the instrument automatically performs measurement and displays the result (multiple parameters can be displayed at the same time).
5. The measurement data is automatically stored and can be exported through the U disk or wirelessly printed through the optional Bluetooth module.
6. You can connect the instrument through the WeChat Mini Program to view the data in real time.
Notice
• Please ensure that the instrument is used at the specified Ambient Temperature (5~ 35 ℃ or 15~ 30 ℃) and Humidity (≤ 75%).
• When replacing Electrode or sensitive film, follow the instructions to ensure good contact.
• Electrode polarization takes 3 to 5 minutes for dissolved oxygen measurement, please be patient.
• The instrument has the function of automatically identifying the standard solution, please use the designated European and American series, NIST series or Chinese series standard solution for calibrating.
When exporting data, please ensure that the USB flash drive format is compatible.
• The instrument meets the IP54 Protection Rating, but it is still necessary to avoid prolonged immersion or strong splashes.
• Please use the original or designated 12V/1A Power Adapter.
