Overview
The RDS 95G #3/8 "Gapped Applicator rod is a Spreader tool designed for high viscosity fluids, manufactured in stainless steel with a diameter of 9.52mm, a total length of 400mm, an application width of 300mm, and a wet film thickness of 217.2μm.
Features
1. Adopt gap wire-wound production process to reduce fluid blockage and scratches.
2. Wide and shallow cavities are formed by winding smaller wires to promote the flow of thick coatings.
3. Wire design reduces coating flow interruption and enhances wetting effect.
4. Stainless Steel Ensures Durability and Stability.
Principle
Following the Mayer Rod film principle, cavities are formed by wrapping smaller wires at spacing, allowing high viscosity fluids to flow and wetting better, reducing clogging and scratches.
Applications
Spreaders for high viscosity fluids, laboratory film prepatives, industrial coatings applications
Steps
1. Prepare high viscosity fluid samples.
2. Applicator rod is placed on the substrate surface.
3. Apply pressure evenly and pull Applicator rod for Spreader.
4. Check Coating thickness and uniformity.
Notice
• Applicator rod clean and free of contamination before use.
• Only suitable for high viscosity fluids, avoid using low viscosity materials.
• Maintain uniform pressure during operation for consistent coatings.
• Avoid collision and corrosion environments during storage.
