Overview
A.shine Dyne pen Model 27 is a professional tool for testing the surface tension of materials. It has a built-in 15ml test solution and can be used more than 100 times for repeatability. It can accurately test whether the surface tension of materials such as Plastic film reaches the set value, help users determine whether the material is suitable for printing, compounding or vacuum aluminizing processes, effectively control mass and reduce losses.
Features
1. Built-in 15ml test solution, which can be used more than 100 times
2. Shelf life is 6-8 months
3. The pen tip is carefully designed to reduce the contact between dyne liquid and air
4. Each pen has undergone multiple inspections, quality assurance
5. Strictly comply with ASTM Standard D2578 and TAPPI T698
Principle
Dyne pen determines surface tension by marking the test solution on the surface of the material with the tip of the pen and observing the behavior of the liquid on the surface. If the test solution does not cissing within 3 seconds, the surface tension of the material has reached the selected Dyne Level; if cissing is not reached, the material suitability can be quickly evaluated.
Applications
Plastic film: PS, PE, PP, PET, PI, PC, NY, CPP, OPP, PVC, conductive materials: aluminum foil, copper foil, carbon foil, vapor coating, Miscellaneous materials: Glass, ceramics, plastic sheet, plastic pipe
Standards
ASTM Standard D2578、TAPPI T698
Steps
1. Choose the right Dyne Level corona pen
2. Clean the film surface and lay it flat on a horizontal table
3. Use a corona pen to stroke lightly on the film surface
4. If the liquid does not cissing within three seconds, the selected dyne is reached, otherwise it is not reached
Notice
Avoid skin/eye contact
Avoid inhaling vapors, mists, or gases
Keep away from heat and ignition sources
