Overview
Pneumatic Basis Weight Sampler is a special tool of JINGHUAYIQI brand LD-DLQ-02 model, which is specially used for Grammage detection sampling of high Grammage and grayboard paper samples. The device can quickly and accurately cut standard area samples, and can accurately and quickly determine the sample Grammage Basis Weight with a special Basis Weight tester. It is a professional auxiliary test tool for papermaking, Encasement and other production enterprises and mass supervision and inspection industries and departments.
Features
1. The sampling area is 100c m2, the error is +/- 0.35c m2, Precision +/- 0.2mm
2. Sampling thickness range 0.0-10 mm, suitable for a wide range of materials
3. Adopt foot-operated pneumatic pressurization Operation mode, pressure up to 1.5T
4. Accurately and quickly determine sample Grammage Basis Weight with special Basis Weight Tester
Principle
The Sampler uses a foot-operated pneumatic pressurized tool to quickly cut a standard area specimen at a cylinder pressure of 1.5 T. The cut specimen is measured with a special Basis Weight meter (Precision Balance) to accurately determine the sample's Grammage Basis Weight.
Applications
Paper, Cardboard, Cardboard, Color Box, Shoe Box, Fiber Fabric, Corrugated Board, Honeycomb Cardboard, Rubber, Aluminum Foil, Leather, Film and other sheet materials Basis Weight sampling
Standards
QB/T1671 "Paper and Cardboard physical performance test of special punching equipment general technical requirements", GB/T451.2-2002 "Paper and Cardboard Basis Weight Determination Method", ISO536:1995 "Paper and Cardboard --- a certain amount of determination"
Steps
1. Connect the vacuum Compressor air source
2. Place the material to be sampled on the Sampler bench
3. Start pneumatic pressure by foot movement
4. The tool completes the standard area sample cutting
5. Take out the sample and use the Basis Weight Tester for measurement
Notice
• Ensure that the gas source is a vacuum Compressor gas source
• The sampling thickness must not exceed 10.0mm
• Pay attention to safety protection during operation
• Regularly check tool accuracy and parallelism (≤ 0.05mm)
• Suitable for 0-3mm pattern, 0-5mm fiber material, 0-10mm sheet material
