Overview
The pneumatic quantitative Sampler (model: NBC-5601C) is a factory direct sales product that can be used for quantitative sampling of composite sheet raw materials such as paper Cardboard, Spinning & weaving products, paper towels, rubber plastic sheets, films and soft Encasement. It can quickly and accurately cut standard area samples, and is an ideal auxiliary experimental tool for papermaking, Encasement and other production enterprises and mass supervision and inspection departments.
Features
1. Quickly and accurately cut standard area samples
2. Suitable for multiple material sampling
3. Factory direct sales, cost-effective
Principle
The sampling device is driven by pneumatic mode, and under the set working environment conditions, the sample of the specified size is accurately cut to ensure that the sampling error is controlled within the allowable range.
Applications
Paper Cardboard Quantitative sampling, Spinning & weaving Quantitative sampling, Paper towels and other supplies Sheet sampling, Rubber plastic and other sheet sampling, Film quantitative sampling, Soft Encasement and other composite sheet raw materials quantitative sampling
Steps
1. Place the equipment in a position that meets the requirements of the working environment
2. Adjust the equipment parameters according to the material Film thickness (applicable Film thickness range 0.1~ 5.0mm)
3. Start the pneumatic system for sampling operation
4. Remove the cut standard area sample for subsequent testing
Notice
• Ensure that the working environment temperature is within the range of (20 +/- 10) ° C
The working environment humidity should be less than 85%
• Sampling Film thickness should be within the range of 0.1~ 5.0mm
• Periodically check equipment Precision to ensure sampling error does not exceed +/- 0.35cm ²
