Overview
YANTE YT-YS3000A Compression Tester is an auxiliary test tool suitable for papermaking enterprises, Cardboard manufacturers, carton manufacturers, carton users and mass supervision and inspection departments. The equipment is mainly used to determine the Ring Crush Test, Flat Crush Test, Edge Crush Test and Edge Crush Test, Flat Crush Test and adhesive strength of corrugated base paper.
Features
1. Adopt High Accuracy Weighing Sensor, Ball Screw Drive and Double Guide Shaft to Ensure Stable Operation.
2. Equipped with ARM processor and 24-bit imported analog-to-digital converter, the Response speed and Test accuracy of the instrument are improved.
3. Linear dispersion diagram of pressure change can be displayed in real time during the test.
4. With over-range automatic reset function, effectively protect the precision Sensor.
5. Support sudden power failure data saving. After booting, the data before power failure can be restored and the test can be continued.
6. Can communicate with microcomputer software (need to purchase separately).
Principle
The Compression Tester uses the High Accuracy Weighing Sensor to measure the force value of the sample during the compression process. The data is processed by the ARM processor and the 24-bit analog-to-digital converter at high speed and accuracy. The device adopts a ball screw drive and a dual guide shaft structure to ensure that the pressure plate moves smoothly at the set speed and applies uniform pressure to the sample to determine its various Compressive Strength indicators.
Applications
Cardboard production enterprises, cardboard production enterprises, carton use enterprises, mass supervision and inspection departments
Standards
GBT 2679.8、GBT 6546、GBT 22874、GBT 6548、GBT_2679.6、ISO 12192、ISO 3037、ISO 3035、ISO 7263、ISO 16945、TAPPI T822、TAPPI T839、TAPPI T825、TAPPI T809、TAPPI-T843
Steps
1. Turn on the power supply and turn on the device.
2. According to the test requirements (such as RCT, ECT, FCT, etc.), select the corresponding test mode on the 7-inch color Touchscreen and set the parameters (such as Test speed).
3. Place the specimen correctly between the upper and lower pressure plates.
4. Start the test, the device will automatically compress the sample and display the pressure Linear dispersion in real time.
5. After the test is completed, the device automatically stops and displays the results, and the report can be printed through the thermal printer.
6. If you need to communicate, you can connect the microcomputer software through RS232, USB or WiFi interfaces.
Notice
* Please ensure that the working Ambient Temperature is between 10 ° C and 35 ° C, and the relative humidity does not exceed 85%.
* Power supply voltage range of AC100V to 240V, 50Hz/60Hz.
* The test force value should not exceed the upper limit of 3000N to prevent damage to the Sensor.
* Pay attention to maintain the parallelism of the upper and lower platens to ensure Test accuracy.
* When moving or installing equipment, pay attention to its weight (about 58kg) to avoid accidents.
The communication function with the microcomputer software is optional and needs to be purchased separately.
