Overview
RK KHC.11.8 is a wide-wound stainless steel Applicator rod with stainless steel wide-wound process and strong structure. The handle head is blue, the total length is 37.5cm, the effective application width is 25.5cm, the film thickness is 100 microns, and the rod body diameter is 0.9cm.
Features
1. Using wire-wound stainless steel wire-wound process, the structure is firm
2. The handle head is blue, easy to identify
3. The film thickness is accurate to 100 microns
4. Effective application width of 25.5cm
5. Total length 37.5cm, easy to operate
6. The diameter of the rod body is 0.9cm, which is comfortable to hold.
Principle
The Applicator rod is formed by wire-wound stainless steel wire uniform gap on the surface of the rod body, when the rod body rolling on the surface of the substrate, Coating is formed by a uniform thickness of 100 microns wet-film coating wire gap.
Applications
Coating Spreader, experimental research, quality control
Steps
1. Coating evenly on the surface of the substrate
2. Hold the Applicator rod handle and place the rod body at the starting end of the Coating
3. Applicator rod pushed forward at uniform speed
4. Clean Applicator rod after Spreader
Notice
• For more accurate Spreader effect, it is recommended to use the RK matching Drawdown Plate (need to be purchased separately)
• Clean promptly after use to avoid Coating
• Avoid strong impact and prevent steel wire deformation
Keep drying during storage to prevent rusting
