Overview
SMART SENSOR ST9660A + circuit board Thermal Analyzer is a dedicated device for thermal field detection, which can provide thermal experiment and thermal simulation data for PCBA product design and development. It is also a dedicated device for circuit board maintenance, which can quickly locate leakage, short circuit and other failure points, and can be used for component detection and overheat protection capability testing.
Features
1. Thermal imagery resolution 260 * 200, frame rate 25Hz
2. NETD 70mK@25 ℃
3. Field of view 34.4 ° horizontally, 25.8 ° vertically
4.4Mm adjustable lens
5. Temperature measurement range -10~ 120 ℃ (can be customized and expanded)
6. Power supply DC 5V (USB Type-C)
7.1 seconds to turn on, 3 seconds to shut down
8. Support USB connection to computer for use
9. Equipped with adjustable brackets and expansion table boards
Principle
The thermal field distribution of the circuit board is detected by thermal imagery technology. When the circuit board has a leakage or short circuit fault, an abnormal temperature rise will occur. Thermal Analyzer can visualize the abnormal temperature rise, so as to quickly locate the location of the faulty device.
Applications
PCBA circuit board leakage, short circuit, off position positioning and inspection and maintenance, mobile phone or Miscellaneous intelligent equipment comparison and evaluation, power consumption design of hardware circuit design, overheating protection component test and inspection, circuit design heating experiment, thermal simulation, heating rationality verification, product heat dissipation capacity detection, equipment heating status evaluation and comparison
Steps
1. Connect the device to the computer USB port
2. Turn on the power switch (turn on for 1 second)
3. Adjust the bracket knob to adjust the shooting angle and distance
4. Place the circuit board on the table board
5. Thermal imagery detection by software
6. Analyze temperature data to locate fault points
7. Turn off the power after use (shutdown for 3 seconds)
Notice
• Operating temperature range -10 ℃~ 55 ℃
• Operating humidity should be less than 95%
• It is recommended to use the Windows 10 system, and Windows 7 is also compatible
• The computer needs to be equipped with more than 3 processors and more than 4G memory
• Can be connected to the Internet for manual or automatic updates
• Extended Temperature range will incur additional costs
