Please contact customer service
Using two-box mobile structure, the test object is driven up and down by air pressure, and the conversion time is short. The temperature recovery time is fast, and it meets many international test standards. Use environmentally friendly refrigerant and high-efficiency freezing system.
Category : Thermal Shock Test Chamber
Brand : Apkjgroup
SKU : NB042382
Service :The delivery and service By NBCLab.Com
APKJ 2AP-CJ-100A Thermal Shock Test Chamber is a device used to test the tolerance of materials in extremely high temperature and extremely low temperature transient environments. The device adopts a two-box mobile design, and the test product is quickly converted between high and low temperature regions by air pressure drive basket to simulate the chemical or physical changes that may occur in the material under thermal expansion and contraction conditions.
1. Adopt two-box mobile design, the test product is dynamic, and the impact is realized up and down through safe air pressure drive. 2. Equipped with 7-inch large touch AP-950 programmable temperature controller, full Touchscreen operation, can arbitrarily set different high and low temperature Impact temperature points. 3. With paperless recording function, it can display the temperature impact test change Linear dispersion diagram in real time. 4. Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with relevant test specifications. 5. Adopt HFC environmentally friendly refrigerant and binary ultra-low temperature freezing system design, with fast cooling and high efficiency. 6. The box insulation material is made of rigid polyurethane foam, which has the advantages of effective energy saving, shock and compression resistance, ultra-low temperature thermal conductivity, waterproof and moisture-proof. 7. Safety protection devices with multiple, including Compressor protection, over-temperature protection, total power supply phase sequence phase loss protection.
The equipment is divided into two parts: high temperature zone and low temperature zone. The test product is placed in the basket. During the impact test, the basket and the test product are quickly moved into the high temperature zone or low temperature zone through the pneumatic drive system, so that they are alternately exposed in the set extremely high temperature and extremely low temperature environment to test the material's tolerance to rapid changes in temperature.
Electronics components, plastics, automation parts, communication components, auto parts, metals, chemical materials, plastics, defense industry, aerospace, military industry, BGA, PCB substrate, electronic chip IC, semiconductor ceramic and polymer materials and other industries
GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.22-2012、GJB150.5-86、GJB360.7-87、GJB367.2-87、QC/T17-92、EIA364-32、IEC68-2-14
1. Place the product in the hanging basket test area. 2. Set the required high and low temperature Impact temperature points and procedures through the Touchscreen controller. 3. Start the equipment, and a safe pneumatic drive system will drive the test object up and down between high and low temperatures. Impact. 4. The equipment automatically runs the program and displays the temperature Linear dispersion in real time.
* The installation site needs to be equipped with the corresponding capacity air or power switch for the use of this equipment, the power requirements are three-phase four-wire + protective ground wire, and the voltage is AC (380 +/- 10) V. * Ambient Temperature around the equipment should be maintained between + 25~ + 30 ℃, relative humidity ≤ 85%. When the equipment is not working, the Ambient Temperature should be kept at 0 ° C to + 45 ° C; when the Ambient Temperature is lower than 0 ° C, the water remaining in the equipment should be drained clean. * This plan does not include the installation of external environment items such as ventilated pipes, power supplies (leakage switches), air sources (air Compressors), and water sources, which need to be prepared by users separately. * Please familiarize yourself with the names and functions of each part of the equipment before operation, and ensure that the Safety protection device works properly.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
