Overview
YUE FENG FP6423 Flame photometer is a small, exquisite and beautiful analytical instrument. It adopts dual-channel LED digital display and silicon Photocell, photovoltaic cell detection technology, which can detect potassium and sodium at the same time, and has the detection function of lithium, calcium and barium. The instrument uses liquefied petroleum gas as fuel, and has the characteristics of small sample volume, high Sensitivity, accurate and stable measurement.
Features
1. Appearance Small, exquisite and beautiful
2. Dual-channel LED digital display, 4-digit digital display per channel, clear reading
3. Unique ignition gas path, push-button automatic ignition, fast and reliable ignition
4. Potassium and sodium can be detected simultaneously, with the detection function of lithium calcium
5. Silicon Photocell, photovoltaic cell detection, accurate and stable measurement results
6. Small Sample Size, High Sensitivity
7. Using liquefied petroleum gas as fuel, easy to use
8. With flameout protection function, safe and reliable performance
Principle
Flame photometer based on atomic emission spectroscopy (AES) principle, the sample in the flame atomization and excitation to produce a characteristic Light spectrum, by silicon Photocell, photovoltaic cell detection of light intensity of a specific wavelength, thereby determining the concentration of elements in the sample.
Applications
Chemical analysis, environment monitoring, food testing, medical inspection, water quality analysis
Standards
GB/T 30430-2013、JJG 630-2007
Steps
1. Turn on the instrument power
2. Connect to LPG fuel
3. Push-button automatic ignition
4. Select the detection element channel
5. Inject the sample solution
6. Read the display measurement results
7. Turn off the air source and power supply after completing the test
Notice
• Check whether the gas connection is firm before use
Make sure the working environment is well ventilated
• Pay attention to safety protection when igniting
• Measurement accuracy with regularly calibrated instruments
• Clean the sample room in time after use
• If not used for a long time, the air source and power supply should be disconnected
