Overview
Tianma FA1204B is a FA series Precision Balance (internal calibration), which belongs to 0.1mg Analytical Balance. The product adopts High Accuracy Electromagnetic Force Equilibrate Sensor with an accuracy of 0.0001g, a maximum range of 120g, and a test weight of 100g.
Features
1. Fully automatic built-in weight calibrated Balance, easy to use and easy to operate;
2. Fast weighing speed, adjustable speed;
3, easy to operate, support mass unit conversion;
4. Highly intelligent, with full-scale peeling, clearing, over-load display and fault alarm functions;
5. It has a variety of functions such as counting to choose from.
6. Built-in RS-232 interface, which can be connected to external devices such as printers and computers.
7. Fourth-level shockproof;
8. Sensitivity touch button;
9. Built-in hook;
10. Glass sliding door transport protection lock.
Principle
High Accuracy Electromagnetic Force equilibrating Sensor for weighing measurement.
Applications
Precision analysis, laboratory weighing
Standards
Accuracy class: Class I
Steps
1. Place the Balance on a stable and horizontal workbench.
2. Connect the AC adapter power supply;
3. Turn on the power and Balance for self-test;
4, according to the need for automatic built-in weight calibrating;
5. Place the item to be weighed on the pan and wait for the reading to stabilize;
6. Use peeling, clearing and other functions for weighing operations;
7. After weighing, turn off the power.
Notice
• Working Ambient Temperature should be maintained at 17.5~ 22.5 ℃, and the temperature fluctuation should not exceed 1 ℃/h.
• Environmental humidity should be maintained at 50-75%.
• Balance is placed on a stable, vibration-free water platform.
• Preheat and calibrate before use.
• Avoid overloading, the maximum load is 120g.
• Pay attention to wind protection and close the Draft Shield Glass sliding door when using it.
• Use a soft dry cloth when cleaning and avoid using chemical solvents.
• When not in use for a long time, please disconnect the power supply.
