Overview
Tianma 1/10,000 Precision Balance Model FA1204 is a Precision Balance with built-in hook and automatic fault detection function. The Balance range is 0~ 120g, the minimum reading is 0.0001g, using external Calibration method, test weight is 100g.
Features
1. Modular Electromagnetic Force equilibrating Sensor
2. Blue large-screen LCD display for range indication
3. High Sensitivity Touch button
4. Built-in hook
5. Glass sliding door transport protection lock
6. Independent clearing and peeling buttons for two-way communication
7. Fast and adjustable weighing speed, Display mode adjustable dynamic temperature compensation
8. Easy to operate, with mass unit conversion, counting, percentage weighing function
9. Highly intelligent, full-scale peeling, automatic zero tracking, overload and underload display, automatic fault diagnosis
10. With a variety of functions such as technical functions to choose from
11. Level 4 shockproof
12. RS232 interface module
Principle
The Electronic Balance uses Modular Electromagnetic Force equilibrating Sensor technology to accurately measure mass by equilibrating electromagnetic force with the gravity of the measured object. It has automatic zero tracking and dynamic temperature compensation functions to ensure weighing accuracy.
Applications
Laboratories, scientific research institutions, industrial production, mass testing
Standards
Accuracy class ⅰ
Steps
1. Place Balance on Stable Table
2. Connect the Power Adapter
3. Turn on the power switch
4. Wait for the Balance Self-Test to complete
5. Externally calibrated with 100g test weight
6. Place the item to be tested for weighing
7. Use the clearing and peeling functions for measurement
8. Transfer data through RS232 interface
Notice
• Working Ambient Temperature should be maintained at 17.5~ 22.5 ℃, temperature fluctuation is not more than 1 ℃/h
• relative humidity should be controlled at 50~ 75%
• Must be externally calibrated before use
• Avoid overloading, the maximum range is 120g
Make sure the Draft Shield is closed when weighing
• Glass sliding door protection lock should be locked during transportation
• Minimum Weight is 10mg, below this may affect accuracy
• Stabilization time ≤ 8s, please wait for the reading after stabilization
