Overview
The UC-250VDE dual-band ultrasonic cleaner is a JINGQI brand product with 25kHz and 45kHz dual-band optional functions. The device is equipped with a stainless steel inner slot and a lower cover, with a capacity of 10L, supports 1-600 minute working time setting and room temperature to 80 ° C. Temperature control.
Features
1. Support 25kHz and 45kHz dual-band conversion options
2.1-600 minutes total working time setting
3. The LCD screen displays the cleaning time and temperature in real time
4. Equipped with a dedicated stainless steel mesh blue and flat cover
5. Working hours countdown display function
6. The inner and outer shells and the sound lowering cover are made of high-quality stainless steel
7. Real-time display of the actual temperature in the cleaning tank
8. Adopt microcontroller software to control the operation program
9. Temperature setting range from room temperature to 80 ° C
10. Power-off memory function for working parameters
Principle
The ultrasonic cleaner converts high-frequency electrical signals into mechanical vibrations through the transducer, generating ultrasonic waves to form a cavitation effect in the cleaning liquid. Impact force is generated when the cavitation bubble ruptures on the surface of the object, effectively removing dirt. The device precisely adjusts the ultrasonic frequency, working time and temperature parameters through a single-chip microcomputer control system.
Applications
Laboratories, Medical Equipment, Electronic Components, Precision Parts, Jewelry, Optical inspection lenses, Mechanical Parts, Hardware Tools
Steps
1. Inject the cleaning liquid into the cleaning tank to the appropriate water level
2. Connect the power supply and turn on the device.
3. Select the desired ultrasound frequency (25kHz or 45kHz)
4. Set the cleaning time (1-600 minutes)
5. Set the required temperature (room temperature to 80 ° C)
6. Put the items to be cleaned into the stainless steel mesh blue
STEP 7 Cover the flat cover
8. Start the cleaning program
9. Remove items after cleaning
10. Use the drainage function to drain the cleaning liquid
Notice
• Make sure the equipment is well grounded before use
• Cleaning fluid must not exceed the maximum capacity mark
• Avoid activating the ultrasonic function in an anhydrous state
• Pay attention to prevent burns during high temperature operation
• Regularly clean the cleaning tank and maintain the equipment
• Do not use in flammable and explosive environments
• Ask a professional to repair the equipment when it fails
