Overview
The TRUIT TR 3008/60/5 Frame Preparer is a 4-sided wet Film Applicator for preparing coating samples in laboratory and research environments. It is made of high-quality wear-resistant and corrosion-resistant alloy steel. The effective Spreader width is 60mm and the film film thickness is 50/100/150/200μm. The instrument can precisely control the film thickness of wet-film or Dry-Film. It is suitable for hiding power, opacity, scrub resistance, sag resistance performance and Miscellaneous mass testing of coatings to ensure the conformity and Repeatability of coatings.
Features
1. Made of high-quality wear-resistant and corrosion-resistant alloy steel to ensure durability and corrosion resistance
2.4-Sided wet-film Spreader Design for Uniform Spreader Effect
3. Spreader width 60mm, suitable for a variety of sample sizes
4. Film thickness selection, film Film thickness of 50/100/150/200μm, to meet different experimental needs
5. Precise control of wet-film or dry-film thickness to ensure coating conformity and Repeatability
Principle
Frame Applicator uses a 4-sided wet-film Spreader mechanism to uniformly Spreader Coating on the substrate, using a preset film Film thickness (50/100/150/200 μm) to control the film thickness of wet-film or Dry-Film, ensuring that the coating has high conformity and Repeatability in quality control and R & D tests.
Applications
Laboratory, research environment, Coating quality control, hiding power test, opacity test, scrub resistance test, sag resistance performance test
Steps
1. Prepare Substrate and Coating Samples for Spreader
2. Select the appropriate film Film thickness (50/100/150/200μm) according to the experimental requirements
3. Place the frame-shaped fabricator on the substrate, ensuring that the Spreader width is 60mm
4. Uniform Spreader Coating to form wet-film
5. As needed, drying or direct follow-up testing
6. Clean the instrument for next use
Notice
• Check whether the instrument is in good condition before use to avoid damage
• Ensure that the surface of the Spreader is flat for uniform coating
• Precise selection of film Film thickness according to experimental requirements
• Clean the instrument in time after Spreader to prevent Coating residue from affecting performance
Operate in a standard laboratory environment to ensure accurate results
