Overview
The American RDS Mailer rod is an imported manual Spreader rod, model 12 #1/2 ", made of 304 stainless steel. This model is a formed Spreader rod with a diameter of 1/2 inch (12.7mm), a film Film thickness of 27.4 μm, a total length of 400mm, and a Spreader width of 300mm. Miscellaneous length customization is supported.
Features
1. Imported Manual Spreader, reliable mass
2. Made of 304 stainless steel, with strong durability
3. formed production process, uniform film
4. The film Film thickness is accurate to 27.4 μm
5. Total length 400mm, Spreader width 300mm
6. Support Miscellaneous Length Customization
Principle
The RDS Mailer rod is manually Spreader on the surface of the substrate through a formed process to form a uniform wet-film coating. The diameter of the Spreader rod is 12.7mm, and the coating of 27.4 μm Film thickness is uniformly Spreader in the width range of 300mm during operation.
Applications
Spreaders, coating prepatives, laboratory testing, materials research
Steps
1. Spreader substrate
2. Place the Spreader rod on one end of the substrate
3. Apply pressure evenly and push the Spreader rod
4. Spreader with 300mm width
5. Clean Spreader for next use
Notice
• Make sure the Spreader is clean and free of contamination before use
• Spreaders maintain uniform pressure and speed
• Avoid collision between Spreader stick and hard objects to avoid deformation
• Clean and maintain in time after use
• Customized length needs to confirm the specifications in advance
