Overview
DUBAN DB25-207FM-50N Integrated Force Gauge is a small, simple and multi-functional High Accuracy thrust and tension testing instrument, which is widely used in Electronics, Construction Hardware, Light Industry Spinning & Weaving, Auto Parts, Lighters and other ignition devices, fire fighting equipment, pen making, lock making, fishing gear, chemical industry, power machinery, scientific research institutions and other industries. Push-pull load, insertion force test, Destructiveness test, etc.
Features
1. High Accuracy and resolution
2. Numbers are displayed, ignoring the difference
3. Four measurement units of N (newton), kg (kilogram), lb (pound), g (gram) are available and converted to each other
4. Peak hold function, keep peak display until manually cleared
5. Data storage function, capable of storing 99 test values
6. Data output function, data can be input into the computer through data cable or Bluetooth for various analysis
7. Green and environmentally friendly, it can be set to automatically shut down without operation for 10 minutes; it can also be shut down manually.
8. Can be powered by alkaline battery; can also be connected to 6V DC power supply
Principle
The Digital Force Gauge through the Sensor measurement of thrust, tensile load, the physical quantity into electrical signals, after processing the measurement value displayed on the four large LCD screen, support peak and instantaneous value measurement, and through the data output interface test data transmission to the computer for analysis.
Applications
Electronics, Construction Hardware, Light Industry Spinning & weaving, Auto Parts, Lighters and other ignition devices, Fire Equipment, Pen Making, Lock Making, Fishing Tackle, Chemical Industry, Power Machinery, Scientific Research Institutions
Standards
Precision: 0.2 grade, accuracy ： +/- 0.2% FS (range) +/- 1 digital peak
Steps
1. Install the battery or connect the 6V DC power supply
2. Select the desired measurement unit (N, kg, lb, g)
3. Perform a thrust or pull test
4. Read peak or instantaneous value display
5. Use the data storage function to save the test value
6. Output data to computer via USB or Bluetooth
7. Manually clear or wait for automatic shutdown
Notice
• The allowable load does not exceed 150% F.s, and there is a beep alarm when it exceeds 110% F.s
• Operating temperature range 0~ 40 ℃
• relative humidity should be less than 80%
• The working environment requires no seismic source and corrosive medium around
• Ensure sufficient power supply before use (2 AA batteries or 6V DC power supply)
• Note that the automatic shutdown time is 10 minutes without operation
