Overview
HUITAI GDT-100BH high and low temperature alternating climate box is a professional temperature and humidity testing equipment, using advanced equilibrating Conditioning Control mode, equipped with intelligent cooling capacity control and intelligent electrical control system. The equipment has a wide Temperature range (-40~ 150 ℃) and Humidity range (20%~ 98% RH), supports fixed-value mode and program mode operation, and can meet the needs of various environment simulation tests.
Features
1.7-Inch TFT color LCD display, supports RMCS control software connection
2. Support fixed value mode and program mode, preset 100 groups of 100 steps and 999 cycles
3. Adopt BTC equilibrate Temperature Control mode + DCC intelligent cooling capacity control + DEC intelligent electrical control
4. RAM with battery protection, maximum recording time 350 days
5. Support RS-485 interface MODBUS RTU communication protocol and Ethernet interface TCP/IP communication protocol
6. Heated observation window with LED interior lighting
7. Various safety protection functions, including Compressor protection, humidification system protection and test chamber protection
8. Adopt French Taikang fully enclosed Compressor and high-efficiency refrigeration components
Principle
The equipment adopts BTHC equilibrate Conditioning Control mode, combined with DCC intelligent cooling capacity control and DEC intelligent electrical control technology. Temperature control is realized through a mechanical single-stage compression refrigeration system, and humidity measurement and control is carried out by a wet-bulb temperature meter method. The refrigeration system uses a high-efficiency slope evaporator and a SWEP plate cold and heat exchanger to ensure accurate temperature and humidity control.
Applications
Electronic product testing, material research, automotive parts testing, aerospace testing, military product testing, scientific research experiments
Standards
GB/T5170.2-2008、GB/2423.1-2008、GB/2423.2-2008、GB/T5170.5-2008、GJB150.3、GJB150.4、GB2423.3-93、GB2423.4-93
Steps
1. Connect the power supply and check whether the voltage meets the requirements
2. Set test parameters through a 7-inch TFT color LCD display
3. Select setting mode or program mode to run
4. Start the device and start testing
5. Export test data through USB interface or Ethernet interface
6. Turn off the device after the test is completed
Notice
• Check whether the Power supply voltage meets the 220V requirement before use
• Ensure the normal operation of the water supply system and avoid dry burning of the humidifier pipe
• Regularly check the refrigeration system pressure and protection devices
• Do not frequently switch on and off the observation window when the equipment is running
• Keep equipment well ventilated
• Regularly Clean Filters and Check Pipeline Connections
• Pay attention to protect the refrigeration system when the equipment is moved
• Maintain in strict accordance with the operation manual
