Overview
HUITAI GDT-1000C High and Low Temperature Alternating climate box is a professional Environmental performance equipment, providing a wide Temperature range of -60~ 150 ℃ and 20%~ 98% relative humidity control. The device uses a 7-inch TFT color LCD display, supports two operation modes of setting value and program, and has the preset ability of 100 sets of programs, 100 steps and 999 cycles.
Features
1. Adopt BTC equilibrate temperature control + DCC intelligent cooling capacity control + DEC intelligent electrical control
2. Configure 7-inch TFT color LCD display, support RMCS control software connection
3. Support fixed value mode and program mode, preset 100 groups of 100 steps 999 cycles
4. RAM with battery protection, maximum recording time 350 days
5. Provide RS-485 interface and Ethernet interface to support secondary development
6. Adopt French Taikang fully enclosed Compressor and high-efficiency refrigeration system
7. Equipped with multiple safety protection systems, including Compressor protection, humidification system protection and test chamber protection
8. Adopt nitrogen flushing welding process and shock absorption and noise reduction design
Principle
The equipment adopts BTC equilibrate temperature control mode combined with DCC intelligent cooling capacity control and DEC intelligent electrical control, and realizes temperature control through mechanical single-stage compression or cascade Compressor refrigeration system. Humidity control adopts wet-bulb temperature meter method, and temperature and humidity sensing is carried out through A-class PT100 armored Thermocouple to ensure accurate environment simulation.
Applications
Electronic product testing, material research, automotive parts testing, aerospace parts testing, military product testing, scientific research experiments
Standards
GB/T5170.2-2008、GB/2423.1-2008、GB/2423.2-2008、GB/T5170.5-2008、GJB150.3、GJB150.4、GB2423.3-93、GB2423.4-93
Steps
1. Connect the power supply and check the device status
2. Set test parameters through a 7-inch TFT color LCD display
3. Select setting mode or program mode to run
4. Monitor equipment operating status and data logging
5. After the test is completed, export the data for analysis
Notice
Equipment must be used under standard load conditions
• Power supply voltage requirement is 380V/50A
• Regularly check the refrigeration system and humidification system
• Make sure the equipment is well grounded
Avoid running for long periods in extreme environments
• Pay attention to the cleaning and maintenance of the observation window
• Regularly check the temperature and humidity sensor accuracy