Overview
Automatic Film Applicator is a device for intermediate coating film in laboratories. It replaces manual film and automatically films to improve the accuracy and efficiency of film. This Film Applicator is a bar drawdown blade Coater. It adopts two coating methods of bar and drawdown blade. It has heating and drying function. It has speed control and application length adjustment functions. It is suitable for laboratory High Accuracy automatic film. Moulding proofing is carried out in laboratories such as university research institutes, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. With heating function, suitable for hot-melt adhesive film
Principle
The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. Two coating methods, bar and drawdown blade, are used to realize automatic film by adjusting the coating speed and application length.
Applications
Coatings, inks, paints, Stocks, Lithium batteries, Pressure sensitive adhesives, Resins, glues, polymer materials, pharmaceuticals and other film samples
Steps
1. Prepare the substrate and fix it on the fixture
2. Select coating method (bar or drawdown blade)
3. Set Spreader parameters (application length, Spreader speed, temperature, etc.)
4. Start the device for automatic filming
5. Remove the sample after finishing the film
6. Clean Spreader Head
Notice
• Please read the instructions carefully before operation
• Make sure the substrate is firmly fixed
• Select the appropriate coating method and parameters according to the sample characteristics
• Pay attention to temperature control when using the heating function
• Clean Spreader Head in time after use
• Keep equipment clean and drying
