Overview
OSP-70/400 coating rod is a professional Spreader tool made of 304 stainless steel, using a formed production process, wet film thickness of 70μm, diameter of 10mm, total length of 400mm, application width of 300mm, no handle can be used directly.
Features
1. Made of 304 stainless steel, it is durable and easy to clean.
2. The production process is formed to ensure uniform Spreader.
3. The wet film thickness is fixed at 70 μm, providing a consistent Spreader effect.
4. Total length 400mm, application width 300mm, suitable for larger area Spreaders.
5. No handle required, easy to operate.
Principle
Coating uniform Spreader on the surface of the substrate by forming a coating rod, using its fixed wet film thickness (70μm) and diameter (10mm) to achieve precise control of the thickness and width of the Spreader layer.
Applications
Spreaders, coating prepatives, laboratory sample Spreaders
Steps
1. Prepare coating rod and substrate to be Spreader.
2. Coating is evenly applied to the substrate.
3. Use the coating rod to move at a constant speed from one end to the other with appropriate pressure.
4. Clean the coating rod after finishing the Spreader.
Notice
• Make sure the coating rod is clean and free of contamination before use.
• Spreader at a constant speed to avoid uneven thickness.
• Clean immediately after use to prevent Coating residue.
• Avoid contact with corrosive substances to prolong service life.
