Overview
The HT-X330GB heating multifunctional Benchtop Shaker is a new generation of circumferential Shaker of the HUXI brand. It uses DC brushless motor and microcomputer control technology for simple operation. By changing different trays, flasks, culture dishes, beakers, etc. can be mixed and fostered, suitable for biotechnology, microbiology and medical analysis. The heating series integrates oscillation and heating functions to meet the needs of experimental samples that need to be heated and open.
Features
1. Large screen LCD display timing time, Rotation speed, temperature value, Operating interface is simple and easy to understand
2. Locked operation mode to prevent misoperation
3. DC brushless motor drive, low noise, accurate speed, long service life, maintenance-free
4. A variety of pallets, cradles, and fixtures are available for a wide range of needs
5. Accessories are easy to replace, greatly improving work efficiency
6. Soft start, accelerate evenly, effectively avoid sample splashing
7. Optional RS232 interface, connected to the computer through RS232 interface, can realize the setting of instrument parameters on the computer side and real-time display of working Linear dispersion
8. The maximum temperature of heating series can reach more than 75 ℃
Principle
The Shaker uses DC brushless motor drive and microcomputer control technology to realize rotary oscillation through knob operation. The heating function is combined with the oscillation to mix and foster the sample to meet the experimental needs.
Applications
Biotechnology, microbiology, medical analysis, chromadizing or decolorization of colloids, combinatorial chemistry
Standards
Shell Protection Rating: IP21
Steps
Connect the power supply to ensure that the voltage is within the range of 100~ 240V
2. Select the appropriate tray, cradle or fixture as required and install it
3. Rotation speed (60~ 400rpm, optional to 500rpm), temperature (RT + 5~ 75 ℃) and timing time (0~ 99 hours 59 minutes) are set by knob
4. Start the device, soft start function to ensure uniform acceleration
5. Optional RS232 interface to connect to computer for parameter setting and monitoring
6. After the experiment is completed, turn off the equipment for cleaning and maintenance
Notice
• Ensure that the Ambient Temperature is within the range of 5~ 40 ° C, and the Humidity does not exceed 80%
• The maximum load does not exceed 7.5KG to avoid overloading
• Pay attention to prevent misoperation when operating, use the locked mode
• Regularly check accessories to ensure easy replacement to improve efficiency
• Avoid sample splashing and use the soft start function
• When heating, pay attention to the maximum temperature not exceeding 75 ° C to prevent overheating
