Overview
HT-X330B Multifunctional Benchtop Shaker is a new generation of circumferential Shaker of HUXI brand. It adopts DC brushless motor and microcomputer control technology, and is equipped with a unique knob operation mode, which is easy to use. By changing different trays, it can mix and foster various commonly used flasks, culture dishes, beakers, suitable for biotechnology, microbiology and medical analysis.
Features
1. Large screen LCD display timing time, Rotation speed, temperature value, Operating interface is simple and easy to understand;
2. Locked operation mode to prevent misoperation;
3. DC brushless motor drive, low noise, accurate speed, long service life, free of warranty;
4. A variety of pallets, cradles, and fixtures are available for a wide range of needs.
5. Accessories are easy to replace, which greatly improves work efficiency.
6. Soft start, accelerate uniformly, effectively avoid sample splashing;
7. Optional RS232 interface, connect to the computer through the RS232 interface, which can realize the real-time display of the setting of the instrument parameters and the working Linear dispersion on the computer side.
Principle
The HT-X330B Shaker uses DC brushless motor drive and microcomputer control technology to achieve mixing operation through rotary oscillation. Its soft start function ensures uniform acceleration, avoids sample splashing, and adapts to a variety of container needs by changing different trays and fixtures.
Applications
Biotechnology, microbiology, medical analysis, chromadizing or decolorization of colloids, combinatorial chemistry
Standards
Shell Protection Rating: IP21
Steps
Connect the power supply to ensure that the voltage is within the range of 100 to 240 volts.
2. Select the appropriate tray, cradle or fixture as required and install it.
3. Rotation speed set by knob (range 60~ 400rpm, optional to 500rpm);
4. Set the timing time (range 0 to 99 hours and 59 minutes);
5. Start the device and observe the LCD screen to confirm the parameters;
6. Optional RS232 interface is available to connect to the computer for parameter setting and real-time monitoring.
Notice
• Power supply voltage between 100~ 240V;
• Permissible Ambient Temperature 5~ 40 ℃, Humidity does not exceed 80%;
The maximum load is 7.5kg to avoid overloading.
• Use locked operation mode to prevent misoperation;
• Regularly check the accessories to ensure easy replacement.
• Soft start function can avoid sample splashing, pay attention to safety during operation.
