Overview
The KAIRDA KS131 Deep Groove Probe is a Sensor accessory designed for Roughness Gauge, which can measure grooves with a width of more than 3mm and a depth of less than 10mm or step surface roughness with a height of less than 10mm. It can also measure plane and cylinder. It needs to be used with the measurement platform.
Features
1. Specially designed for deep groove and step measurement, suitable for grooves with a groove width greater than 3mm, a groove depth less than 10mm or steps with a height less than 10mm
2. Compatible with plane and cylinder asperity measurement
3. Can be used with measurement platform to improve measurement Stability
4. Support extension rod and adapter rod to expand Measurement range
Principle
KS131 Deep Groove Probe, as the Sensor of Roughness Gauge, detects the surface profile through the contact Measurement mode, converts the Mechanical displacement into an electrical signal, and transmits it to the host for data processing and analysis, so as to obtain the surface roughness parameters.
Applications
Groove asperity measurement, step surface roughness measurement, plane asperity measurement, cylindrical asperity measurement
Steps
Connect the KS131 Deep Slot Probe to a compatible KAIRDA Roughness Gauge host
2. Install extension rods or adapter rods as required (optional)
3. Place the Probe on the surface to be tested (groove, step, plane or cylinder)
4. Start Roughness Gauge measurement
5. Read and record measurement results
Notice
• When measuring the groove, make sure that the groove width is greater than 3mm and the groove depth is less than 10mm
• The height of the measurement steps should be less than 10mm
• Plane and cylindrical measurements need to be used with the measurement platform
• Measurement range can be extended with extension rod as needed
• Transverse displacement measurement with adapter rod
