Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is drawdown Bar & blade Coater, using bar and Drawdown blade two coating methods, with Vacuum chuck function, innovative bar Installation method and clamshell Drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, hot-melt adhesive and other laboratories.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. With Vacuum chuck function, suitable for thin film and other soft substrate Spreader
Principle
Automatic Film Applicator uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. High Accuracy automated film is realized by using two coating methods, bar and Drawdown blade, combined with Vacuum chuck function to fix the substrate.
Applications
Coatings, inks, paints, Stock, hot-melt adhesives, Lithium batteries, Pressure sensitive adhesives, Resin, Glue, Polymer materials
Steps
1. Prepare the substrate (e.g. film, cardboard, aluminum foil) and place it on the Spreader table
2. Choose the bar or Blade Coating method as needed
3. Set application length and Spreader speed parameters through Touchscreen
4. Vacuum chuck function fixed substrate
5. Start the automated film process
6. Spreader finished, clean the clamshell Drawdown blade and bar
Notice
• Make sure the substrate is fixed flat on the Spreader stage before Spreader
• Select the appropriate coating method and thickness parameters according to the sample characteristics
• Regularly clean the Spreader head to maintain Spreader accuracy
• Pay attention to whether the Vacuum chuck function is working normally during operation
• Customized parameters need to be confirmed in advance for equipment compatibility
