Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar Installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and application length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium, glue, Resin, etc.
Features
1. Glass countertop is 3c certified national standard genuine all tempered Glass plate, gold crystal original sheet, heat resistance 600 ℃, scratch resistance
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. Uniform coating is achieved by bar Spreader and Blade Coating.
Applications
Coatings, inks, paints, Stock, Lithium batteries, Pressure sensitive adhesives, Resin, Glue, Polymer materials, pharmaceuticals and other film samples, can be scraped on Glass, cardboard, fabric
Steps
1. Prepare the substrate and samples
2. Set Spreader parameters (application length, Spreader speed) through Touchscreen
3. Select coating method (bar or drawdown blade)
4. Start the device for automatic filming
5. Clean the Spreader head after finishing the Spreader
Notice
• Power supply voltage matching before use (standard 220V/50HZ, can be customized 110V/60HZ)
• Make sure the substrate is firmly fixed before Spreader
• Select the appropriate coating method and thickness parameters according to requirements
• Clean the Spreader head in time after the Spreader is completed, especially the clamshell drawdown blade head
• Pay attention to safety during operation and avoid contact with moving parts
