Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a drawdown blade type Automatic film applicator with heating and Vacuum chuck function, innovative bar Installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, electricity, glue, Resin, etc.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. With heating and Vacuum chuck function
4. Flap drawdown blade design, cleaning fast and convenient
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. Blade Coating method, combined with Vacuum chuck fixing substrate and heating function, realizes High Accuracy automatic film.
Applications
University research institutes, New materials, Lithium batteries, glues, Resin, Coatings, inks, paints, Stocks, Pressure sensitive adhesives, polymer materials, pharmaceuticals and other laboratories
Steps
1. Prepare the substrate and samples
2. Place the substrate on the Spreader platform and secure it using a Vacuum chuck or fixture
3. Set parameters such as Spreader speed, application length and heating temperature through Touchscreen
4. Install and adjust drawdown blade to desired Spreader thickness
5. Start the device for automatic filming
6. After the Spreader is completed, turn up the drawdown blade for cleaning
Notice
• Ensure that the power supply of the equipment meets the requirements before operation (100V~ 220V/50~ 60HZ)
• Check whether the Vacuum chuck system is working properly before Spreader
• Be careful not to exceed the upper limit of 180 ° C when setting the heating temperature
• Spreader the drawdown blade and countertop in time after completion
• Regularly check the running status of all parts of the equipment
