Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory, replacing manual film and automatically filming to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and Spreader length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment aluminum alloy countertop, high hardness and wear resistance, the flatness of the countertop is tested by imported High Accuracy instruments.
2. Big brand differential regulator, high film thickness control accuracy.
3. Flip Type Blade Coating Head, Easy to Clean.
4. High Accuracy film applicator with high accuracy of original imported bar film.
5. Touchscreen control panel, easy to operate.
6. Spreader length and Spreader speed can be adjusted freely.
7. With heating and Vacuum chuck function.
8. Using servo motor, the operation is more stable and the film accuracy is higher.
Principle
The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters.
Applications
Paint, inks, paints, Stock, Lithium Battery, Pressure sensitive adhesive, Resin, Glue, Polymer Materials, Pharmaceuticals and other film sample preparation, can be scraped on Glass, cardboard, fabric.
Steps
1. Prepare the substrate and sample.
2. Set Spreader parameters (e.g. Spreader length, Spreader speed).
3. Select the coating method (bar or drawdown blade).
4. Start the device for automatic filming.
Notice
• Make sure the power supply of the device is stable before use.
• Pay attention to the Spreader parameter settings during operation to avoid exceeding the range.
• Regularly clean the Spreader head and countertop to maintain equipment accuracy.
• Pay attention to temperature control when using the heating function to prevent overheating.
