Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. This Automatic Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and Spreader length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment aluminum alloy countertop, high hardness and wear resistance, the flatness of the countertop is tested by imported High Accuracy instruments.
2. Big brand differential regulator, high film thickness control accuracy.
3. Flip Type Blade Coating Head, Easy to Clean.
4. High Accuracy film applicator with high accuracy of original imported bar film.
5. Touchscreen control panel, easy to operate.
6. Spreader length and Spreader speed can be adjusted freely.
7. With heating and Vacuum chuck function.
8. Using servo motor, the operation is more stable and the film accuracy is higher.
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. Specifically, bar Spreader and Blade Coating are used, combined with servo motor drive, Vacuum chuck fixing substrate and heating function to achieve High Accuracy and Uniform film process.
Applications
Paint, inks, paints, Stock, Lithium Battery, Pressure sensitive adhesive, Resin, Glue, Polymer Materials, Pharmaceuticals and other film sample preparation, can be scraped on Glass, cardboard, fabric.
Steps
1. Prepare the substrate and sample.
2. Secure the substrate to the Spreader stage using a Vacuum chuck or fixture.
3. Select the bar or Blade Coating method as needed, and set the Spreader parameters (such as Spreader length, Spreader speed, film thickness).
4. Start the film process through the Touchscreen control panel.
5. After the film is finished, turn off the equipment and clean the Spreader head.
Notice
Make sure the power supply of the device is connected correctly before operation to avoid power instability.
- Spreader safety and avoid contact with moving parts.
When cleaning the Spreader head, use appropriate tools to avoid damage.
- Check the Vacuum chuck system and heating function regularly to ensure proper operation.
- Adjust Spreader parameters according to material properties for the best film effect.
