Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory, replacing manual film and automatically filming to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and Spreader length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment aluminum alloy countertop, high hardness and wear resistance, the flatness of the countertop is tested by imported High Accuracy instruments
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. High Accuracy film applicator, original imported bar film uniform accuracy
5. Touchscreen control panel, easy to operate
6. Spreader length and Spreader speed can be adjusted freely
7. With heating and Vacuum chuck function
8. Servo motor, more stable operation, higher film accuracy
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters.
Applications
Coatings, inks, paints, Stocks, Lithium batteries, Pressure sensitive adhesives, Resins, glues, polymer materials, pharmaceuticals and other film samples
Steps
1. Prepare samples and substrates
2. Set Spreader parameters (Spreader length, Spreader speed)
3. Fixed substrate (using Vacuum chuck or fixture)
4. Select coating method (bar or drawdown blade)
5. Start Automatic Film Applicator for Spreader
6. Clean the Spreader head after finishing the Spreader
Notice
• Make sure the device power supply and Vacuumpump are connected correctly before use
• Check the flatness of the countertop and the cleanliness of the Spreader head before the Spreader
• Select the appropriate coating method and Film thickness parameters according to sample characteristics
• Avoid touching the heating parts during operation to prevent burns
Maintain equipment regularly to ensure film accuracy and stability
