Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory, replacing manual film and automatically filming to improve the accuracy and efficiency of film. This Automatic Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and Spreader length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium battery, glue, Resin, etc.
Features
1. Surface hard treatment aluminum alloy countertop, high hardness and wear resistance, the flatness of the countertop is tested by imported High Accuracy instruments.
2. Big brand differential regulator, high film thickness control accuracy.
3. Flip Type Blade Coating Head, Easy to Clean.
4. High Accuracy film applicator with high accuracy of original imported bar film.
5. Touchscreen control panel, easy to operate.
6. Spreader length and Spreader speed can be adjusted freely.
7. With heating and Vacuum chuck function.
8. Using servo motor, the operation is more stable and the film accuracy is higher.
Principle
The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters.
Applications
Coatings, inks, paints, Stocks, Lithium batteries, Pressure sensitive adhesives, Resins, glues, polymer materials, pharmaceuticals and other film samples
Steps
1. Prepare the substrate and sample.
2. Secure the substrate to the Spreader stage using a Vacuum chuck or fixture.
3. Set Spreader parameters, such as Spreader length and Spreader speed, through Touchscreen.
4. Select the coating method (bar or drawdown blade) and install the corresponding Spreader head.
5. Start the device for automatic filming.
6. After the film is finished, turn off the equipment and clean the Spreader head.
Notice
Before operation, please ensure that the power supply of the equipment meets the requirements (100V~ 220V/50~ 60HZ).
- Avoid touching moving parts during Spreader to prevent injury.
- When cleaning the Spreader head, pay attention to the clamshell design for easy operation.
- When using the heating function, pay attention to the temperature range (RT +~ 180 ° C) to avoid burns.
- Check the Vacuum chuck system regularly to ensure proper operation.
- The weight of the equipment is 40kg, and attention should be paid to safety when handling.
