Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar drawdown blade Coater, using bar and drawdown blade two coating methods, with Vacuum chuck function, innovative bar Installation method and clamshell drawdown blade head greatly improve Spreader efficiency, easy to clean, support speed control and application length adjustment, suitable for laboratory High Accuracy automatic film, Moulding proofing in university research institutes, New material, lithium battery, glue, hot-melt adhesive and other laboratories.
Features
1. Surface hard treatment Aluminum alloy countertop, Hardness and wear resistance, Smoothness of countertop is detected by imported High Accuracy instrument
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. Equipped with High Accuracy Film Applicator, the original imported bar film has high uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
7. With Vacuum chuck function, suitable for thin film and other soft substrate Spreader
Principle
Automatic Film Applicator uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. High Accuracy automatic film is realized by using two coating methods, bar and drawdown blade, combined with Vacuum chuck function to fix the substrate.
Applications
Coatings, inks, paints, Stock, hot-melt adhesives, lithium batteries, Pressure sensitive adhesives, Resin, glues, polymer materials and other film sample preparation
Steps
1. Prepare samples and substrates
2. Fix the substrate to the Spreader stage using Vacuum chuck or fixture
3. Select the coating method (bar or drawdown blade) and set the parameters
4. Adjust application length and speed via Touchscreen
5. Start the device for automatic filming
6. Spreader head after film
Notice
• Make sure the equipment power supply meets the requirements before use (220V/50HZ or customized voltage)
• Check whether the substrate is firmly fixed before Spreader
• Select the appropriate coating method and thickness parameters according to the sample characteristics
• Regular cleaning of Spreader head to maintain accuracy
• Avoid touching running parts during operation
• Customized parameters need to be confirmed in advance
