Overview
Automatic Film Applicator is a device for intermediate coating film in the laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. This Film Applicator is a bar drawdown blade Coater with two functions: bar Spreader and Blade Coating. The innovative bar Installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, which is easy to clean. It has speed control and application length adjustment functions. It is suitable for high Accuracy automatic film in the laboratory.
Features
1. Smoothness hard aluminum alloy baseplate, scratch resistance
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. Equipped with High Accuracy Film Applicator, the original imported bar film has high uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters.
Applications
Moulding proofing is carried out in laboratories such as research institutes in colleges and universities, New materials, lithium batteries, glues, Resin, etc. Coatings, inks, paints, Stock, lithium batteries, Pressure sensitive adhesives, Resin, glues, polymer materials, pharmaceuticals and other film samples can be scraped on Glass, cardboard, cloth.
Steps
1. Prepare the substrate and samples
2. Set Spreader parameters (application length, Spreader speed)
3. Select coating method (bar or drawdown blade)
4. Start Film Applicator for automatic filming
5. Clean the Spreader head after finishing the film
Notice
• Please read the operating instructions carefully before use
• Make sure the substrate is firmly fixed
• Select the appropriate coating method and parameters according to the sample characteristics
• Clean the Spreader head in time after the Spreader is completed
• Regularly check the operating status of the equipment
