Overview
Automatic Film Applicator is a device used for intermediate coating film in laboratory. It replaces manual film and automatically films to improve the accuracy and efficiency of film. The Working Principle of Experimental Automatic Film Applicator is to uniformly Spreader the sample on the substrate by controlling the Spreader head and Spreader parameters to form the desired film. This Film Applicator is a bar drawdown blade Coater, with bar Spreader and Blade Coating two functions, the new bar Installation method and clamshell drawdown blade head greatly improve the efficiency of Spreader, easy to clean, with speed control and application length adjustment function, suitable for laboratory High Accuracy automatic film, Moulding proofing in laboratories such as university research institutes, New material, lithium, glue, Resin, etc.
Features
1. Hard aluminum alloy plate
2. Big brand differential regulator, high film thickness control accuracy
3. Clamped Blade Coating Head for Easy Cleaning
4. Equipped with High Accuracy Film Applicator, the original imported bar film has high uniform accuracy
5. Touchscreen control panel, easy to operate
6. Free adjustment of application length and Spreader speed
Principle
The Working Principle of Automatic Film Applicator is to uniformly Spreader the sample on the substrate to form the desired film by controlling the Spreader head and Spreader parameters. This Film Applicator uses two functions of bar Spreader and Blade Coating, which are driven by servo motors to achieve precise control of coating speed and length.
Applications
Coatings, inks, paints, Stocks, Lithium batteries, Pressure sensitive adhesives, Resins, glues, polymer materials, pharmaceuticals and other film samples
Steps
1. Prepare the substrate and fix it on the fixture
2. Select coating method (bar or drawdown blade)
3. Set application length and speed via Touchscreen
4. Start the device for automatic filming
5. Clean the Spreader head after finishing the film
Notice
• Make sure the thickness of the substrate does not exceed 20mm before use
• Check whether the bar and drawdown blade are firmly installed before Spreader
• Pay attention to the operation of the clamshell drawdown blade when cleaning
• Select the appropriate Spreader parameters according to the sample characteristics
• Maintain equipment regularly to ensure Spreader accuracy
