Overview
MOLECULAR MP-10L Lab water purifier is a device dedicated to laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation, including PP fiber filter, activated carbon filtrate, reverse osmosis (RO) membrane, purification column and other accessories. The water production rate of the equipment is 10L/h, the water intake Flow velocity is 1.0L/min, and it adopts intelligent microcomputer control. It has touch buttons, operation status display and water quality online monitoring functions to realize man-machine dialogue.
Features
1. Fully automatic microcomputer control, support automatic water generation, standby, alarm, flushing and other functions
2. RO film automatic regular anti-scale flushing and manual forced flushing
3. Automatic domestic circulation system to maintain ultra-pure water quality
4. Equipped with PE controllable 30-liter pure water tank
5. Using high-quality components: DOW membrane, ROHMHAAS ultra-pure Resin, MOL filter and carbon filter, SMC solenoid valve, E-CHEN booster and conveyor pump, PE pipe valve fittings and PE water tank, Cheng Magnetic Resistance meter, OMRON electronic control components, liquid level controller, intelligent controller
6. Water resistivity online display, liquid crystal display
7. Automatic protection for water, power, overload, etc
Principle
The equipment treats tap water through a multi-stage filtrate system, including PP fiber filter cartridge, activated carbon filtrate, reverse osmosis (RO) membrane and purification column, removes impurities and ions, and the produced water meets the GB6682 class I water standard, with a resistivity of 14-16MΩ .cm, and maintains water quality through an automatic domestic circulation system.
Applications
Laboratory physical and chemical quantitative analysis, buffer solution and high standard solution preparation
Standards
GB Grade III pure water, GB6682 Grade I water standard
Steps
1. Connect the tap water source to ensure that the water pressure 0.1-0
2. Turn on the power supply 220V/50HZ
3. Start the device by touching the button to automatically generate water
4. Monitor the water quality parameters and operating conditions of the LCD display
5. Manual forced rinsing of RO membrane as required
6. Flow velocity 1.0L/min from PE pure water tank
Notice
• Inlet water source must be tap water, water pressure range 0.1-0 MPa
• Power requirements 220V/50HZ, Power 100W
• The working environment water temperature should be between 5 and 40 ° C
• The northern region needs to be used in an antifreeze room
• Regularly check automatic protection functions, such as water outage, power outage, and overload protection
• Follow equipment flushing and maintenance guidelines
