Can reduce the contact resistance 35~ 95% and temperature rise 35~ 85%, high temperature resistance up to 170 ℃, with anti-oxidation, anti-corrosion performance, suitable for a variety of metal connections, improve safety and extend service life.
Adopt high temperature fan and special air duct to ensure temperature uniformity, equipped with low speed turntable; Temperature range RT + 10~ 200 ℃, uniformity +/- 2 ℃, support 3-100 times/h ventilation volume adjustment.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable and hot air circulation system to ensure stable and uniform temperature in the working room.
The use of high temperature fan and special air duct to achieve uniform heating, equipped with low-speed turntable to ensure uniform heating of the sample, Temperature Fluctuation control within +/- 0.5 ℃, ventilation can be adjusted within the range of 3-100 times/hour.
Adopt high temperature and low noise motor and multi-leaf centrifugal wind turbine, Temperature Uniformity +/- 2 ℃, equipped with low speed turntable, support 3~ 100 times/h ventilation volume adjustment, to meet a variety of aging test needs.
Can reduce the contact resistance of 35~ 95%, reduce the temperature rise of 35~ 85%, high temperature resistance of 200 ℃, with anti-oxidation, anti-corrosion performance, suitable for different metal connections, improve electrical connection Stability.
Can reduce the contact resistance of 35~ 95% and temperature rise of 35~ 85%, high temperature resistance up to 200 ℃, with anti-oxidation, anti-corrosion performance, suitable for a variety of metal connections, improve safety and stability.
With 0.0MΩ~ 49.9GΩ wide range insulation resistance testing capability, support 100V to 2500V multi-gear Rated voltage, Sampling rate 0.5~ 10 times/second, buzzer alarm function, portable design weighs only 404g.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
4.0Mm diaMeter nickel-chromium wire ring, Temperature range 500~ 1000 ℃ adjustable, apply 0.8~ 1.2N force and limit the pressing depth of 7mm, automatic timing of ignition and extinguishing time, Thermocouple 1050 ℃ high temperature resistance.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Mechanical and electrical separation structure design, easy maintenance, with automatic intelligent feed function, according to the hardness of materials automatically adjust Rotation speed, to avoid stagnation, the maximum cutting cross-section up to Φ 90mm, after cutting the sample surface flat without burns.
