Overview
The PosiTector 6000 N1 film thickness measurement instrument is a special measuring instrument for the measurement of film thickness produced by Defelsko Defelsko in the United States. It has an anti-wear conjoined Probe, which can accurately and nondestructive measurement of film Coating thickness. The built-in probe structure is very suitable for one-hand operation. The PosiTector 6000 N1 film thickness measurement instrument is a large LCD screen that can store 250 test data. The thickness gauge is easy and convenient to operate through menu navigation.
Features
1. Dedicated to the measurement of paint film thickness, with anti-wear Siamese Probe;
2. Accurate nondestructive measurement of coating thickness;
3. The built-in probe structure is very suitable for one-handed operation.
4. Large LCD display, capable of storing 250 test data.
5. Simple and convenient operation through menu navigation;
Measurement speed, more than 60 readings per minute;
7. Protection Rating IP65, suitable for harsh environments;
8. Light weight, only 137g (without battery), good portability;
9. Large data storage capacity, can store 1000 Measured values and 100 screen images.
Principle
The PosiTector 6000 N1 film thickness measurement instrument uses the eddy Current principle for measurement, which is suitable for nonconductive coatings on non-ferrous metal substrates (such as copper, aluminum, etc.).
Applications
Non-ferrous metal substrate, nonconductive coating environment
Standards
ISO 2178/2360/2808、PrEN ISO 19840、ASTM B499/D1186/D1400/D7091/E376/G12、BS3900-C5、SSPC-PA2
Steps
1. Turn on the power supply of the device;
2. Select Measurement mode through menu navigation;
3. Probe placed on the surface of a nonconductive coating of a nonferrous metal substrate;
4. Read the measurement results on the LCD screen;
5. Data can be stored or exported through the USB interface.
Notice
• Only suitable for non-ferrous metal substrates (such as copper, aluminum, etc.) and nonconductive coatings;
• Make sure the equipment calibrating certificate is valid before use;
• Avoid use in extreme environment conditions to maintain Measurement accuracy;
• Regularly check the battery level and use 3 * AAA alkaline batteries;
• Pay attention to the capacity limit when storing data, the maximum storage is 1000 Measured values and 100 screen images;
• Keep the Probe clean during operation to avoid abrasion affecting the measurement results.
