Overview
AN AD500S-P (30G) High Speed Disperse Mulser is a laboratory or pilot plant driven by a series-excited micro high-speed motor. It is designed for Stir mixing, pulverizing particles and shear emulsification of low to medium and high viscosity liquids. It consists of high-speed motors, shear emulsification heads and speed control controllers.
Features
1. The drive main engine adopts die-cast aluminum alloy body, and the operation state is stable.
2. The working head is made of high-quality stainless steel and has a wide range of experimental applications.
3. The running speed is controlled by the microprocessor, which can instantly and effectively compensate for the speed changes caused by load changes and Power frequency fluctuations, and the constant speed is reliable.
4. Built-in soft start and automatic overload protection ensure the safety of continuous operation at full load for a long time.
5. Stepless adjustment of the rotational speed meets the need to correct the Stir rotational speed at any time in the experiment.
6. Equipped with a "P-type" dynamic indicator.
Principle
The device drives the shear emulsification head swirl/spin through a high-speed motor, so that the experimental medium is subjected to the triple effect of extrusion, strong Impact and loss of pressure expansion in the feed liquid, so as to achieve the refinement, homogenization and emulsification of the material, and prevent or reduce the delamination with the feed liquid.
Applications
Tissue dispersion, sample preparation, enzyme treatment in the food industry, liquid and liquid phase, liquid and solid phase experiments in the pharmaceutical industry, cosmetic industry, paints industry and Petrochemicals in the field of biotechnology. Specifically, homogenization and emulsification processes in the production of dairy, beverages, cosmetics, pharmaceuticals and other products.
Notice
• Permissible Ambient Temperature ≤ 40 ℃.
• Allowable relative humidity ≤ 80%.
The maximum operating temperature is 120 ° C.
• The minimum immersion liquid height is 60mm, and the maximum immersion liquid height is 170mm.
