Overview
YOKE DSH-50A-1 Halogen moisture meter is a precision instrument for rapid determination of free moisture in samples. It uses halogen lamp heating, rapid heating, short test time, suitable for chemical raw materials, grains, minerals, biological products, food, raw materials, paper, Spinning & weaving raw materials and other samples of rapid moisture determination.
Features
1. Adopt large and high-resolution backlit point array LCD screen, which is convenient for operation in the dark and more comfortable.
2. Keypad Operation Chain Disk makes operation more convenient.
3. High Accuracy Insulation Sensor is used to collect data with reliable temperature.
4, the use of halogen lamp heating drying, rapid heating, short test time.
5. During the test, the drying state can be directly confirmed and the end time can be estimated.
6. With automatic peeling function, it can be measured continuously in real time, and can also be accurately measured by zero drift correction.
7. Built-in R232C output interface, can be connected to computers, printers and other peripheral devices.
Principle
The instrument uses a halogen lamp as a heating source to heat the sample placed on the pan, so that the free water in the sample evaporates rapidly. The instrument monitors the sample weight change in real time through the High Accuracy Insulation Sensor, and automatically calculates and displays the moisture content percentage according to the weight loss. The determination process can be controlled by timing or automatic mode.
Applications
Chemical raw materials, grains, minerals, biological products, food, raw materials, paper, Spinning & weaving raw materials
Steps
1. Turn it on and warm up.
2. Place the sample on the pan.
3. Set the heating temperature, time, and other parameters as required.
4. Start the heating test program.
5, the instrument automatically monitors the weight change and calculates the moisture content, and displays the results after the test.
6. Output data can be connected to peripheral devices through the RS232 interface.
Notice
The recommended sample size is 3-10g, with a minimum sample size of not less than 0.5g.
* The recommended operating temperature range is 10-30 ° C.
The heating temperature can be set in the range of 50 ° C to 160 ° C (1 ° C interval).
* The measurement end method can be selected from timing or automatic control.
Please ensure that the instrument is placed smoothly before use.
* Do not use in flammable and explosive environments.
