Overview
BOZHEN 101-0AS digital display stainless steel blast drying oven liner is made of 304 stainless steel, with a maximum operating temperature of 300 ° C and Inner chamber dimensions of 350X350X350MM. It is suitable for baking, drying, heat treatment and Miscellaneous heating, and can be used in industry or in laboratories. Its operating temperature can be raised from room temperature to the highest temperature, and thermostatic can be selected arbitrarily. The device adopts an intelligent digital temperature controller for temperature control, with intuitive readings, high Sensitivity and easy operation.
Features
1.The liner is made of good 304 high temperature resistant stainless steel.
2. Adopt intelligent program 8-segment digital temperature controller PID temperature control, with temperature sensing element PT100, accurate temperature control, intuitive reading.
3. Equipped with an electric blower to force hot air circulation to make the indoor temperature more uniform.
4. With Timer Range 0-9999 minutes.
5. Equipped with over-temperature alarm, over-temperature alarm 0-50 degrees adjustable.
6. Glass observation window is provided in the box door, which is convenient for observing the situation in the working room.
7. The exhaust valve or external exhaust pipe can be opened to replace the air in the working room.
Principle
The drying oven generates heat through an electric heater, and the large air volume centrifugal fan forcibly drives the hot air to vent at the top and return at the bottom of the studio to form a circulation, so that the temperature of the studio is uniform. The intelligent digital display temperature control instrument (PID) detects the temperature through the temperature sensing element PT100, and compares it with the set value to automatically control the on-off of the heating system (SSR) to achieve accurate thermostatic control.
Applications
Baking, drying, heat treatment, industrial heating, laboratory heating
Steps
1. Place the sample on the shelf in the studio.
2. Close the box door.
3. Turn on the power supply.
4. Set the required operating temperature and time on the intelligent thermostat.
5. Start the equipment, and the heating and blast system will start working.
6. After the work is completed, turn off the power and remove the sample.
Notice
• It is not suitable for placing items with volatile substances to avoid explosion.
• Sample placement should not exceed the shelf load (15KG/block).
• When the equipment is working, do not open the box door frequently.
• Regularly check electrical circuits and control components.
• Be sure to disconnect the power supply before cleaning.
