Overview
DASHENG DA7001 piston air Compressor is a DA700 series piston oil-free air Compressor produced by DASHENG, equipped with a pump head, the volume of the air tank is 30L, and the Power is 750W. The product adopts a pure oil-free design, and the inside of the gas tank is derusting to ensure that the gas tank is not easy to rusting and ensure the internal air pressure mass. The product has passed the ISO9001-2008 and ISO13485-2012 mass system certifications of TUV in South Germany, simple maintenance, no need to add lubricating oil.
Features
1. Pure oil-free design, the output gas does not contain oil molecules, and is harmless to the human body
2. Ultra-quiet operation, low noise, smooth output pressure without fluctuation
3. Multi-stage filtrating system, gas clean and pure, prolong service life
4. Anti-rust treatment of lame plating in the gas tank to avoid rust pollution of the air
5. Overheating automatic shutdown protection, safe to use
6. Automatic start during intermittent use, no need for manual switching
7. Adjustable air pressure to meet different equipment requirements
8. Durable, can be used for more than 15,000 hours
9. Easy to operate, can be used when powered on
10. Simple maintenance, no need to add lubricating oil
Principle
Piston air Compressor through the round-trip movement of the piston, the air through the filter into the Compressor for compression, compressed gas through the metal hose to open the check valve into the air storage tank. When the pressure reaches 0.8Mpa, the pressure switch is automatically closed, the motor stops working, and at the same time emptying through the solenoid valve is reduced to 0. When the pressure of the air storage tank drops to 0.5Mpa, the pressure switch is automatically turned on, and the Compressor starts working again. This product belongs to the micro reciprocating piston air Compressor. It adopts a single-axis double-cylinder structure. The motor single-axis drives the crank rocker mechanism with a 180 ° distribution of misalignment. The cylinder Travel volume changes periodically through the reciprocating motion of the piston.
Applications
Oral cavity, endoscopy, cleaning tank, food fermentation, life science, biotechnology, analytical instruments, measuring instruments, water treatment, laboratory, environment monitoring, automation, coating surface preparation, beauty, clothing manufacturing, footwear, Petrochemicals, stage background, automobile braking
Standards
ISO9001-2008, ISO13485-2012, European Union industrial CE certification, US FDA certification
Steps
1. swirl/spin pressure switch to the "-" position to turn on the power supply
2. The Compressor automatically starts to work, and the pressure gauge pointer rises
3. Automatic shutdown when the pressure reaches 0.8MPa
4. Exhaust through ball valve when using equipment
5. Automatic restart when the pressure drops to 0.5 MPa
6. After use, the swirl/spin pressure switch goes to the "0" position to disconnect the power supply
Notice
• When the Compressor encounters a fault that causes the current to be too large, the overload protector will automatically disconnect the protection motor
• After Troubleshooting, the overload protector button needs to be manually reset to operate normally
• Regularly discharge the water accumulated in the gas storage tank through the sewage valve
• The exhaust pressure can be adjusted by filtrating the pressure regulating valve (0.1~ 0.8Mpa)
• When the Operating Pressure is greater than 0.88Mpa, the safety valve will automatically open the exhaust pressure reduction
