Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Coating speed 1~ 10m/min adjustable, wet film thickness range of 0.005-3mm, drying temperature up to 200 ℃, using continuous experimental film design, equipped with adjustable Blade Coating device and automatic deviation correction function.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
The continuous groove structure is made by extrusion process, the wet film thickness is 22.9 microns, the application width is 300mm, and it has the characteristics of continuous wire and easy cleaning.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
The continuous groove design prevents clogging by impurities, with a wet film thickness of 84.6 μm and a diaMeter of 6.35 mm, making it suitable for high-viscosity coatings and easy to clean and maintain.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
The formed process ensures that the film is continuous, the wet film thickness is 7 μm with high accuracy, and the 304 stainless steel material is durable and easy to clean.
