The special forming process heater has no warpage deformation at high temperature, excellent corrosion resistance of the spray panel, uniform working surface temperature, Heating power 2 × 1000KW, rapid and safe heating.
4 groups of samples can be tested at the same time, using PID temperature control accuracy of 0.1 ℃, support segmented program heating, one key automatic calculation of carbon black and ash content, open the lid structure heat dissipation fast.
Using aluminum alloy chuck and stainless steel pole, baseplate size 290 * 210mm, pole height 780mm, suitable for 16mm Cube lifting fixed clip, stable and durable structure.
4 groups of samples can be tested at the same time, using PID precise temperature control technology, Temperature range from room temperature to 1000 ℃, with automatic calculation of carbon black content and ash content function, open lid structure heat dissipation effect is better.
The device Frequency is 2MHz, Probe diaMeter 12mm, Measurement range 3.0-300 mm (steel), dedicated to cast iron and other coarse crystal materials, minimum pipe diaMeter 20mm, suitable for industrial environment applications.
Adopting imported energy adjustment switch, the Furnace body is made of steel plate, the Furnace plate and the heating wire die are stamped, which effectively increases the heat energy distribution, the maximum temperature is 500 ° C, the Heating power is 6KW, and the operation is safe without open flame contact.
Using special forming heater high temperature without deformation, working area of 1200cm ², Temperature range RT +~ 999 ℃, touch button operation is simple and safe.
The thermal weight loss method is used to measure carbon black content, the operating temperature can reach 990 ° C, and the 7-inch Touchscreen is equipped to realize one-button calculation, support segmented paraMeter setting, and the Furnace body separation design has better heat dissipation.
Using electrochemistry principle to detect carbon monoxide, with a range of 0~ 1000ppm, with four Alarm modes and wireless data transmission functions, support temperature compensation algorithm and a variety of usage methods.
Adopt imported energy adjustment switch and die stamping stove, maximum temperature 500 ℃, quadruple station design, no open flame contact to improve safety, Heating power 4KW can be adjusted.
The maximum temperature can reach 500 degrees Celsius, using imported energy adjustment switch to achieve Power stepless or stepwise adjustment, Furnace plate and heating wire die stamping to enhance heat energy emission, no open flame design to enhance operation safety.
Power stepless speed regulation is realized by using imported energy adjustment switch, the maximum temperature is 500 ℃, the Furnace plate and heating wire die are stamped to enhance heat energy emission, and the operation safety is improved without open flame contact.
Using 2.0MHz Frequency Probe, Measurement range 2.0~ 400.0mm, dedicated to the thickness detection of coarse crystal materials such as cast iron, the lower limit of pipe measurement Φ 30 * 4mm.
Using 330 * 230mm carbon steel baseplate and 22 * 985mm stainless steel pole, with aluminum alloy chuck, to achieve stable clamping and flexible height adjustment, suitable for a variety of experimental devices.
High Accuracy timing chip to achieve +/- 0.05mm accuracy, support single and double crystal probe to cover ultra-thin to conventional workpiece measurement, with automatic gain adjustment and coating penetration function, Operating temperature range -10~ 50 ℃.
