The extrusion process ensures that the bar is unbroken and easy to clean, the film thickness is 45μm, the total length is 250mm, and the 304 stainless steel material is durable and reliable.
The wet film thickness can be as low as 1.5μm to achieve ultra-thin Spreader; the bottom of the groove is wider, and the Coating Weight is larger; the extrusion process is adopted to avoid the problem of loose wire and broken wire, and it is easy to clean.
Using wire-wound design, uniform groove is formed by precision winding stainless steel wire, wet film thickness control accuracy reaches 4 μm, application width 220mm, to ensure uniform coating and repeability.
Using extrusion process and 304 stainless steel material, the minimum wet film thickness can be controlled by 1.5 μm, and the groove design provides greater Coating Weight to avoid wire loosening and clogging problems.
The wet film thickness can be controlled by 1.5μm, the bottom of the groove is wider and the Coating Weight is large, and the extrusion process and chrome plating surface are adopted, which is not easy to loosen the broken wire, easy to clean and not blocked.
Coating thickness is controlled by wire-wound process, wet film thickness reaches 100μm, application width 365mm, uniform groove is formed by precision stainless steel wire winding to achieve accurate Spreader.
It can control the wet film thickness as low as 1.5μm. It adopts extrusion process and 304 stainless steel material. The bottom of the groove is wider and the Coating Weight is larger, and it is not easy to loosen and break the wire, and it is easy to clean.
Wire-wound structure, wet film thickness 4μm, diaMeter 12.7mm, total length 585mm, wire diaMeter 0.05mm, stainless steel material to ensure durability and precise coating control.
Using wire-wound process, wet film thickness 12 μ m, application width 220mm, through precision winding stainless steel wire to form a uniform groove, to achieve precise and controllable Coating thickness.
Using extrusion process and 304 stainless steel material, the wet film thickness can be controlled by 1.5μm, and the bottom of the groove is wider to increase the Coating Weight, so as to avoid the problem of steel wire loosening and blockage.
The wire-wound design ensures uniform coating application, with a wet film thickness of 109.7 microMeters and a coating width of up to 300 milliMeters, making it suitable for surface treatment on a variety of substrates.
Coating thickness is controlled by wire-wound structure, wet film thickness reaches 100μm, application width 420mm, uniform groove is formed by precision stainless steel wire winding to achieve repeability Spreader effect.
Coating thickness control of 4-120μm using wire-wound structure, spiral winding design up to 500μm thickness, with 220mm application width and 0.64mm wire diaMeter to ensure Spreader uniformity.
Linear dispersion of the surface is processed by cold extrusion technology, no risk of steel wire loosening and breaking, wet film thickness 80 µm, diaMeter 16mm, easy to clean and ultra-thin film Spreader.
Using extrusion process and chrome plating surface, the minimum wet film thickness is 1.5μm. The wide groove design improves the Coating Weight, avoids the problem of steel wire loosening and blockage, and is easy to operate.
