It adopts 11-tooth cutter design, provides four spacing options from 1mm to 3mm, and is suitable for paint film adhesion testing with a thickness of less than 250mm. The operation is simple and the results are accurate and reliable.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
11 tooth cutter design, 2mm pitch, single-sided simple cutter head, can carry out cross-cut experiment, test coating adhesion, in line with a number of international standards.
Equipped with three swirl/spin cutter heads, the tooth spacing is 1mm, 2mm and 3mm respectively, and it is designed according to ISO2409 standard for accurate evaluation of coating adhesion performance.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0-10.5 mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Made of stainless steel, with 6 cutter teeth, the cutter tooth spacing is 2mm, which can provide a uniform cutting effect and is suitable for paint film adhesion testing.
Made of stainless steel, with 6 cutter tooth designs, with a cutter tooth spacing of 3mm, strong durability and stable cutting effect, suitable for accurate paint film testing requirements.
Adopting 6 cutter face circumference multi-face cutter tooth design, the service life is significantly extended; the number of cutter teeth is 11, and the spacing is 2mm, which is suitable for hard substrate testing in the range of 60-120μm film thickness.
The adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel ≥ 80mm. The integrity of the paint film was evaluated by seven grades, and the operation was simple and conformed to the GB/T1720 standard.
Equipped with 1mm and 2mm cutter head spacing, the number of cutter teeth is 11, which can meet the needs of different paint film thickness testing, easy to operate and in line with international standards.
The number of teeth 6, spacing 3mm, using circumferential multi-faceted cutter surface design, long service life, suitable for film thickness greater than 120 μ m hard substrate test cross-cut.
Rotation speed 80rpm, Working Travel 80mm, in line with international standards, to ensure accurate and reliable film adhesion assessment.
Adopting 6 cutter face circumference multi-face cutter tooth structure, the service life is significantly improved. The cutter tooth spacing is 1mm, which is suitable for the testing requirements of solid substrates with film thickness below 60μm.
Made of stainless steel, the cutter tooth spacing is 1-3mm, the cut mark length is 35mm, and the coating is cut through the grid pattern, and the adhesion effect is evaluated according to the six-level classification, which is suitable for a variety of surface tests.
Made of stainless steel, with 6 precision teeth, the spacing is accurate to 1mm, and the cutting edge is kept sharp to ensure the accuracy and Repeatability of the paint film test.
