The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted without complex installation and is suitable for temperature monitoring of a variety of electrical equipment.
The rated temperature is 55 ° C and the error is only +/- 1 ° C. The melting situation can be observed remotely, and it can be directly pasted for use in busbars or equipment terminals to monitor temperature changes.
Adopting three-color reversible discoloration technology, when the temperature reaches 65 ° C, it changes from white to red, and after cooling, it turns to black to record historical overtemperature. The size of 25 * 40mm is easy to paste and install, and can be used repeatedly to monitor temperature changes.
Wall-Mounted waterproof structure is equipped with PTFE anti-clogging dialysis membrane, supports 0.0-14 pH Measurement range and +/- 0.2pH accuracy, alarm point can be set at 3-11pH, LED light reminder when the setting exceeds +/- 0.5pH, extending ElectRode life.
Adopting a non-light infrared NDIR Sensor, with a range of 0~ 1000ppm, Response Time ≤ 15 seconds, supports a variety of signal output and remote transmission, and has overvoltage protection and automatic recovery functions.
Adopt non-light infrared NDIR Sensor, Response Time ≤ 15s, accuracy ≤ +/- 2%, support a variety of signal output and remote transmission, with overvoltage, lightning protection and other protection functions to ensure stable and reliable monitoring.
Adopt non-light infrared NDIR Sensor, Response Time ≤ 15s, detection accuracy ≤ +/- 2%, support PPM,% VOL, mg/m ³ Unit switch, with overvoltage protection and automatic recovery function.
Measurement range of +/- 1000mV, equipped with large LCD display with background light, support manual two-point calibrating and automatic diagnostic function, can verify calibrated status and ElectRode status, fail safe alarm system to improve operational Reliability.
Adopt photometric 90 ° scattering measurement method, equipped with automatic cleaning brush and bubble measurement cell, support automatic sewage discharge and cleaning interval setting, Measurement range 0.00-500 NTU, Repeatability ≤ 2%.
Real-time monitoring of sample temperature, temperature range 0 ℃~ 100 ℃, accuracy +/- 1.0 ℃, can be used with a variety of Viscometers.
With temperature discoloration warning function, when the temperature reaches 55 ℃ from black to red and display numbers, chill down Color reversible recovery, can be used to monitor temperature repeability.
Temperature range 0~ 110 ℃, equipped with sample temperature detection device, can monitor and correct the liquid temperature in real time, to ensure that the test data is accurate and reliable, to meet the high requirements of the experimental environment.
Rated temperature 60 ℃ accuracy +/- 1 ℃, can observe the melting state at a distance, directly paste the use without complicated operation, suitable for a variety of electrical equipment temperature monitoring.
The melting temperature error is only +/- 1 ° C, allowing for remote observation of the melting state. It can be directly pasted and used without complicated operation, and is suitable for temperature monitoring of various electrical equipment.
Temperature range -10~ 100 ℃, temperature resolution 0.01 ℃, with overheating and overcurrent multiple protection, large screen backlit LCD display, easy to operate and monitor.
